Special Design for MSK Bearing Cover Supply to Turkey

Special Design for
 MSK Bearing Cover Supply to Turkey

Short Description:

Product Detail


Company Core Philosophy

The company is specialized in casting mould technology design, tooling development, mould   making,gravity casting aluminum alloy products, machining service as a whole, and has 36 seniorr&dengineers. 20 years experience in professional mould making.Strong technical team with certain research and development capabilities.Full machinery focus on quality and after-sales service.

Payment & Delivery

Payment Terms: 30% for deposit, 70% before shipment.

Package Details: usually use the standard 1200*800mm wood pallet, but can customized packaging according to the different products.

Delivery45 days after order confirmation.


Factory Equipment

There are 4 workshops in the company which including tooling workshop, casting workshop , machining workshop ,cleaning workshop and one full-equipped laboratory.

Factory Equipment

Our Certificate


Our Service


China Foundry Expo

Participate in China Foundry Expo every year.



Q:Plant Maturity – Years in service?

A:24 hour

Q:Project Management is existed for new production?

A:Yes,We have

Q:Ownership – Main Share Holders?

A:Private Comp.

Q:Export License and/ or Experience?


Q:Products Development time?

A:2 Month.

Q:Products Cycle time ?

A:2 Weeks.


Product Tags

With this motto in mind, we have become one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Special Design for MSK Bearing Cover Supply to Turkey, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.

  • Previous:
  • Next:

  • Watch more Wilderness Survival Skills videos: http://www.howcast.com/videos/354377-How-to-Make-a-Bow-and-Arrow

    Want to play Robin Hood? Get in on the action with these steps.

    A bow and arrow is not a toy. Pointing it at someone could result in serious injury.

    Step 1: Make the stave
    Find a straight or slightly curved live branch about 4 or 5 feet long with a 1 to 1 ½-inch diameter. Choose wood that flexes without cracking. Use a saw or a knife to cut the branch from a tree, then whittle off any smaller branches and knots.

    Step 2: Carve the notches
    Make a horizontal, ½-inch deep groove an inch from both ends of the branch on the outside of its natural curve. Then, carve out the wood between the grooves and the ends, forming two notches. This is the stave, or wooden part of the bow.

    For a more finished look, whittle the bark off the stave, sand it, and wrap twine tightly around the middle as a grip.

    Step 3: Prepare the twine
    Measure and cut a piece of twine about 6 inches shorter than the length of the stave. Tie one end of the string securely around one end of the stave, on the notch. Tie a slipknot on the other end of the twine, forming a loop.

    Step 4: Get in position
    If you’re right-handed, hold the string-free end of the stave in your right hand and the slipknot in your left. Rest the other end of the stave against the outside of your left foot. Step over the stave with your right foot. Reverse this position if you’re left-handed.

    Step 5: Bend the stave
    Bend the end of the stave towards the slipknot, using the leg that’s in front of the stave as a fulcrum. Slide the loop of the slipknot around the notch and gently release the stave, forming your bow. Remove your leg from between the stave and the bowstring.

    Loosen the bowstring whenever you’re not using the bow to keep it from getting too loose.

    Step 6: Make the arrow
    Sharpen one end of the dowel rod with a pencil sharpener. Light a candle and run the point through the flame it until it turns black to harden the wood. Carve a small groove in the other end of the rod for the string.

    Whittle small straight branches into arrows if you don’t have dowel rods.

    Step 7: Make the feathers
    Cut heavy card stock paper into three right triangles an inch wide and 2 inches tall. Fasten them to the base of the arrow with superglue.

    Step 8: Shoot
    Now all that’s left to do is test out your DIY bow and arrow with a little target practice! Bull’s-eye!

    Did You Know?
    Bone arrowheads dating back to 61,000 years ago have been found in South Africa.

    800x800mm working area, ballscrew transmission, cast steel table, body cover for safety…, a economical model ATC, can meet your request of nonmetal and aluminum, copper ….metal material processing.


    Related Products

    WhatsApp Online Chat !