Factory Outlets Oil Filter to Estonia Factories
Company Core Philosophy
The company is specialized in casting mould technology design, tooling development, mould making,gravity casting aluminum alloy products, machining service as a whole, and has 36 seniorr&dengineers. 20 years experience in professional mould making.Strong technical team with certain research and development capabilities.Full machinery focus on quality and after-sales service.
Payment & Delivery
Payment Terms: 30% for deposit, 70% before shipment.
Package Details: usually use the standard 1200*800mm wood pallet, but can customized packaging according to the different products.
Delivery： 45 days after order confirmation.
There are 4 workshops in the company which including tooling workshop, casting workshop , machining workshop ,cleaning workshop and one full-equipped laboratory.
China Foundry Expo
Participate in China Foundry Expo every year.
Q:Plant Maturity – Years in service?
Q:Project Management is existed for new production?
Q:Ownership – Main Share Holders?
Q:Export License and/ or Experience?
Q:Products Development time?
Q:Products Cycle time ?
"Quality first, Honesty as base, Sincere service and mutual profit" is our idea, in order to develop continuously and pursue the excellence for Factory Outlets Oil Filter to Estonia Factories, We appreciate your enquiry and it's our honor to work with every friend worldwide.
PMP MOLD , China Promising Mold Plastic Co.,ltd
- Professional Mold Maker , PMP MOLD team aim to make every project successful !
1. Mold components ( slide, mold insert, cavity and core block, pin custom made ).
2. Injection mold ( 2-K mold, insert mold, multi-cavity mold, over molding ).
3. Die casting mold.
4. OEM Plastic injection molding.
~ ADVANTAGE :
1. Have cooperated with a lot of importers in US for more than 8 years.
2. Experienced in doing business with big customers.
3. Quick delivery time for decent orders.
4. Own designing team.
5. Have High – Precision Equipments to deal with that all the Customers Needs.
6. Have Fluent English communication skill from sales to engineer.
~ More YouTube About China PMP MOLD: https://www.youtube.com/channel/UCjAKyNaGClnu2SSZEaNbVfQ/featured
– Web: http://www.cpmpmold.com/
– Skype: jim.pmp
– Email: Jim0pmp@gmail.com
Making a Cavity Pour Mold with Mold Max 30 RTV Silicone Rubber from Smooth-On.
Our model is a hand-carved hard wood 3-dimensional figure. Drill an air release hole in to the middle of a baseboard. Secure model to baseboard with screws. Apply plastic wrap to the original model to protect the surface. Cover the model with 1/2-inch (1.3 cm) clay blanket. Create a 2-inch (5.1 cm) flange for registration. Build a 3-inch (7.6 cm) clay dividing wall and apply clay supports. Drill indentations in the baseboard to register shell. Build a clay pour spout and a 1/2-inch clay dam. Apply Sonite Wax to baseboard and then apply Ease Release 200 to the entire surface.
Measure and mix duoMatrix NEO with a mix ratio of 2A:1B. Combine parts and mix thoroughly. For the first layer, apply a detail coat to the first half. Measure and mix duoMatrix NEO with chopped fiber. Apply this as the second layer. Apply a third layer of duoMatrix NEO without chopped fiber. A wood support leg is attached using duoMatrix NEO. Let cure for one hour.
Once the NEO has cured, remove the dividing wall. Drill indentations into shell for registration. Build a clay dam and pour spout. Apply Sonite Wax to baseboard and exposed shell and then apply Ease Release 200 to the entire surface. Measure and mix NEO for the second half of the support shell, following the same procedure used to create the first half. Again, a wood support leg is attached using NEO and the shell is allowed to cure one hour at room temperature. A rasp is used to create a smooth flange edge, and then three holes are drilled through the support shell. Bolts will help secure the support shell during casting.
Demold the support shell halves, remove the plastic wrap from the model, and then remove clay from the support shell. Create vent holes in support shell to allow air to escape. A 1/4-inch (6 mm) drill bit is used to drill holes through the support shell for a total of six air vents. Apply release agent to both the model and support shell. Register the support shell over the model and secure. Use bolts to hold the support shell halves together. Drywall screws are used to secure the support shell to the baseboard. Seal all seams with a hot glue gun. Place drinking straws into pre-drilled holes for air release, using clay to help secure and seal the straw. Only 1/4-inch of the straw will go into the support shell. IMPORTANT: Do not allow the drinking straws to touch the model. Trim the top two straws for easier access to the pour spout.
Measure and mix Mold Max 30 silicone rubber. Then vacuum the Mold Max 30. After vacuuming, pour Mold Max 30 into the pour spout. Cap the top of the straws with clay to stop the flow of rubber, saving material. Continue to pour rubber until the cavity is filled. Let Mold Max 30 rubber cure for 16 hours at room temperature. Once cured, remove the support shell and rubber mold from the model. Perfect detail is captured from the original model.
How to cast into the mold:
The mold is first primed with auto body primer. Smooth-Cast 300 liquid plastic is measured, mixed, and poured into the mold. After three minutes, the liquid plastic turns to a solid. Let Smooth-Cast 300 cure for 10 minutes at room temperature. Remove the support shell and demold casting. A perfect reproduction! The casting is ready to be painted.
Make It Now! with Smooth-On